Furman M-8S Power Conditioner with Sequencer

Install an M-8S in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-amp load.

Merit M-8S Power Sequencer is the perfect low-cost AC power solution for any rack mount system where power sequencing is desired.

Install an M-8s in to the top slot of your rack, and the six delayed outlets in the rear panel will power up sequentially and protect all your equipment up to a 15-amp load.

Includes 3 delayed outlet banks - each with 2 outlets - plus 2 unswitched outlets.

Features

• Power Sequencing - Prevents excessive inrush currents; Six sequenced rear panel outlets (in three groups), two unswitched rear panel outlets, and one front panel unswitched outlet; Momentary and maintained sequencing via rear panel terminal block or front panel switch (momentary only).
• Noise Filtration - Noise filtering to reduce radio frequency and electromagnetic interference.
• Surge Protection - Ensures equipment stays safe.
• 9 Total Outlets - Eight rear panel outlets and one front panel convenience panel outlet.
• 15 Amp Rating - 15 amp rating, with circuit breaker.
• "Protection OK" Indicator - Front panel indicator LEDs for Outlet Banks, Protection OK and Power Status.
• Wall Wart Spacing - Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters.
• All settings and configurations available on rear panel.